CMMC Levels Explained: Level 1, Level 2, and Level 3

CMMC levels explained - Level 1, 2, and 3 comparison

7 min read  ·  CMMC Compliance

If you are new to defense compliance, the tiers can be confusing – so here are the CMMC levels explained in plain English. The Cybersecurity Maturity Model Certification (CMMC) program has three levels, each with its own security requirements and its own way of proving you meet them.

Getting the CMMC levels explained clearly matters: certifying to a level that is too high wastes money, and certifying too low can cost you the contract. This guide compares Level 1, Level 2, and Level 3 – and helps you decide which one your business really needs.

The Big Picture

Data Sensitivity Drives Your Level

Each CMMC level corresponds to the type of government information you handle:

Federal Contract Information (FCI)non-public information associated with a contract.
Controlled Unclassified Information (CUI)more sensitive technical and program information.

The more sensitive the data, the higher the level – and the tougher the evaluation. With that in mind, here are the three CMMC levels explained one by one.

Level 1

CMMC Level 1: Basic Safeguarding of FCI

Level 1 is the entry point, for contractors that handle FCI but not CUI. It involves 17 basic cybersecurity practices – such as using secure passwords, restricting who can access your systems, and installing anti-virus software – as outlined in FAR clause 52.204-21.

The evidence for Level 1 is light: a completed annual self-assessment and an executive affirmation, with no third-party audit. If you are one of the many small suppliers who only receive basic contract information, Level 1 may be the only level you will ever need.

CMMC Level 1 protecting Federal Contract Information

Level 1 covers basic safeguarding of Federal Contract Information

Level 2

CMMC Level 2: Protecting CUI with NIST 800-171

Most defense contractors will land at Level 2. It applies to any business that stores, processes, or transmits CUI, and is based on the 110 security controls of NIST SP 800-171, organized into 14 control families.

The pressure – and the scrutiny – is greater here. Most CUI contracts require a third-party assessment every three years by a Certified Third-Party Assessor Organization (C3PAO), plus annual affirmations. Self-assessment is permitted for a limited number of programs, but plan for a C3PAO audit. Because Level 2 mirrors NIST 800-171, the effort required to meet the standard is the same effort required to earn the certification. Learn more in our guide to getting CMMC ready.

CMMC Level 2 based on NIST 800-171 controls

Level 2 is built on the 110 controls of NIST SP 800-171

Level 3

CMMC Level 3: Defending Against Advanced Threats

Level 3 is the highest level, only for contractors supporting the DoD’s most critical programs. On top of the 110 Level 2 controls, it adds enhanced requirements from NIST SP 800-172 aimed at thwarting advanced, persistent threats. Level 3 assessments are performed by the government (the Defense Industrial Base Cybersecurity Assessment Center), not a commercial C3PAO. Relatively few companies will need Level 3 – but those that do should expect the most demanding path to certification.

At a Glance

A Quick Comparison

Level 1Data: FCI. Basis: 17 FAR practices. Assessment: annual self-assessment.
Level 2Data: CUI. Basis: 110 NIST 800-171 controls. Assessment: C3PAO every three years (some self-assessment).
Level 3Data: high-value CUI. Basis: 800-171 plus NIST 800-172. Assessment: government-led.

Your Decision

Which CMMC Level Do I Need?

It all comes down to one question: what information do your contracts involve? If you only use FCI, Level 1 may be sufficient. If you touch CUI – drawings, specifications, program data – you are looking at Level 2. Depending on the DoD program you support, you may be directed to Level 3.

The safest approach is to check your contract clauses (DFARS 252.204-7012, 7019, 7020, 7021), map where protected data lives in your business, and confirm the level before you invest in remediation. Not sure where you fit? Contact us to pinpoint your level, or start with our guide to preparing for CMMC compliance. You can also review the DoD CMMC program details.

Team deciding which CMMC level they need

The right level depends on the data your contracts involve

Frequently Asked Questions

How many CMMC levels are there?

There are three. Level 1 covers basic safeguarding of FCI, Level 2 protects CUI per NIST 800-171, and Level 3 adds NIST 800-172 for the most sensitive programs.

Which CMMC level do most contractors need?

Most defense contractors that process Controlled Unclassified Information need CMMC Level 2, which is based on the 110 controls of NIST SP 800-171.

What is the difference between CMMC Level 1 and Level 2?

Level 1 covers 17 basic practices for FCI with a self-assessment. Level 2 covers 110 NIST 800-171 controls for CUI and generally requires a third-party (C3PAO) assessment.

Who needs CMMC Level 3?

Only contractors supporting the DoD’s most critical programs. It adds enhanced NIST 800-172 requirements and is assessed by the government.

Find the Right CMMC Level for Your Business

Solvere One helps DoD contractors interpret the CMMC levels and build a realistic path to the certification they actually need.

Solvere One – Compliance Services

Contact Info

Mon - Fri : 8:00am - 5:00pm
571-293-6267
Contact Us

Locations

Virginia Office
22365 Broderick Dr, Suite 100 Dulles, VA 20166

DC Office
601 Pennsylvania Ave, NW, South Building, Suite 900, Washington, DC 20004